An efficient air source heat pump, achieving energy efficiency of A++ at 55°C and A+++ at 35°C.
It features precise water temperature control, higher efficiency, smoother start-up, wider operating range and longer compressor life.
Jest przydatna do ogrzewania i chłodzenia. W zimie może podgrzewać wodę do temperatury 58°C, a latem chłodzić pomieszczenia, gdy temperatury na zewnątrz są wysokie.
An easy-to-install unit that contains all the components needed to generate heat.
The pump uses R32 refrigerant, which has a low greenhouse gas creation factor.
One of the quietest heat pumps on the market, with a maximum noise level of 42 dB.
The heat pump is guaranteed for up to five years.
The compact design of the heat pump (monoblock) contains all the components necessary for efficient operation and rapid heat generation. It allows the use of a small amount of R32 refrigerant, easy installation and low-cost servicing.
The Mitsubishi compressor at the heart of the heat pump makes it efficient and quiet (<42 dB.). It allows the heat pump to produce hot water for the central heating system or domestic hot water.
Thanks to the use of high-quality components such as the Mitsubishi compressor and WILO water pump – the unit is guaranteed for up to 5 years.
TERMOSTAR ECO heat pumps have advanced controls for programming the unit's operation, domestic hot water preparation, monitoring operation and heat production. The wireless WiFi control system enables the unit to be controlled from anywhere in the world.
The heat pump should always be connected to the central heating system via a buffer tank.
Always connect the heat pump to the central heating system via a buffer tank. Use an enamelled tank with a coil for domestic hot water.
Owners of the photovoltaic power stations can use DSO electricity grids as an accumulator, storing the excess of electrical energy generated in the domestic PV system, when it is not consumed in the house and it allows using it during the evening or on days when the energy demand is higher.
|Building energy-efficiency rating||Size of the photovoltaic system [kWp]||Annual heating cost|
|A++ (10 kWh/m²/year)||1.8||0$|
|A+ (15 kWh/m²/year)||2.7|
|A (35 kWh/m²/year)||6.3|
|B (60 kWh/m²/year)||10.9|
|C (90 kWh/m²/year)||16.3|
|D (130 kWh/m²/year)||23.6|
|Building energy-efficiency rating||Size of the photovoltaic system [kWp]|
|Energy efficiency class||—||A+++|
|SCOP Seasonal Coefficient of Performance in heating mode||W/W||4,77||4,67||4,94||4,95|
|Nominal cooling output||kW||6,25||8,99||11,0||17,82|
|Nominal electrical power in cooling mode||kW||1,54||2,41||3,08||4,92|
|Maximum electrical power consumption||kW||2,76||3,45||3,9||5,5|
|Compressor type||—||Mitsubishi / Twin Rotary|
|Amount of refrigerant||kg||1,5||2,25||2,80||3,9|
|Circulating water pump||—||WILO|
|Maximum heating water outlet temperature||°C||58|
|Heating water pressure range||bar||0,5/3,0||0,5/3,0||0,5/3,0||0,5/3,0|
|Operating range/outdoor air temperature in heating mode||—||-15°C/58°C|
|Operating range/outdoor air temperature in heating mode with heater||—||-25°C/58°C|
installation of heat pumps exclusively by Certified Installers with PEREKO Authorisation Certificate,
assembly of hydraulic and electrical components and peripheral elements such as central heating and hot water tanks,
removal of the old installation and installation of the new installation (plumbing and electrical) within the boiler,
dismantling of old heating installations - room preparation.
ul. Eugeniusza Kwiatkowskiego 43
tel. +48 41 2745353
fax +48 41 2745326